XY-W50L WIFI Electronic Clock DC 5V-24V 50W+50W Bluetooth Amplifier APP Control Alarm 12/24H
XY-W50L Bluetooth Amplifier & WiFi Alarm Clock
XY-W50L is a high-power 50W*2 Stereo Bluetooth Digital Power Amplifier Board with WIFI Electronic Clock Alarm.
Its WiFi timing function supports automatic networking APP control.
With a built-in global time zone that can be used anywhere .
It can set 6 alarm clocks and 8 levels of adjustable brightness.
It supports 2.0 channels audio signal output built-in amplifier module therefore it can connect to loudspeaker directly.
It supports Bluetooth music receive and AUX/USB audio inpu, ideal for DIY wireless Bluetooth speakers and transponders.
WIFI Electronic Clock.
6 alarms and adjustable 8 levels brightness.
12H or 24H hourly optional system.
Built-in global time zone.
Stereo dual channel.
Bluetooth/AUX/U-disk/USB sound card audio input.
Active/Passive audio output.
APP control and adjust time/date/day/Bluetooth.
1>.Product name:XY-W50L WIFI Electronic Alarm Clock and Bluetooth Amplifier
3>.Work Voltage: DC 5V-24V
4>.Work Current: 25A
5>.Unique function: Sinilink APP control Bluetooth and Clock
6>.Clock: WIFI Calibrate
7>.Channel: 2.0 channel stereo output
8>.Bluetooth: BLE 5.0
9>.Audio input type: Bluetooth/AUX/U-disk/USB sound card
10>.Audio output type: Left/Right/AUX
11>.Adjust volume: Encoder independent adjustment
13>.Output power: 50W*2
14>.Match speaker: 10W-100W/4ohm-8ohm
15>.Communication distance: 15meter(Max)
16>.Over temperature protection: Yes
17>.Short circuit protection: Yes
18>.Over current protection: Yes
19>.Module Size(Installed): 72*50*43mm
4.WIFI Clock Function:
1>.Wireless WiFi auto calibrate time and time zone.
2>.App remote firmware auto upgrade.
3>.0.8inch LED display screen.
4>.Display time and date.
5>.Programmable 6 alarm clocks.
6>.Programmable 8 brightness levels.
7>.Built-in global time zone.Automatically check the time every hour.
8>.Built-in clock battery to make sure the real time clock.
9>.Optional automatic power saving function. The screen will OFF without any operation in 10 second if enable power saving function.
10>.Auto save setting parameters.
5.APP WIFI Clock Control:
1>.Keep press ’ SET ’ button 5 second enter into Touch WIFI pairing mode at running status. Blue LED indicator flashes 4 times every 1 second interval at Touch pairing mode.
2>.Keep press ’ SET ’ button 5 second again enter into AP WIFI pairing mode after Touch mode. Blue LED indicator flashes continuously and rapidly at AP pairing mode.
3>.Enter Touch WIFI pairing mode by default after power ON.
4>.Open APP Sinilink and register an account.
5>.Select and click Touch(select AP mode if pairing fails)
6>.Input your WIFI password and then next. Note: It just can support 2.4GHz WIFI signal but not support 5GHz WIFI.
7>.Set device information and then connect.
8>.Select AP mode by press ’ SET ’ button 5 second if pairing fails at Touch mode. User needs select WIFI network ‘Sinilink Product’ and input password 12345678. Then open APP and select AP mode.
6.APP Bluetooth Control:
1>.Download APP Sinilink via Google play store and register an account if you need control it by APP.
2>.Select add device and then click the Bluetooth logo.
3>.Then click Search Bluetooth.
4>.Select devices ‘Sinilink-APP’ to connect module.
5>.User can adjust volume, select next or previous, play/pause, select EQ.
6>.Module will speak prompt voice if disconnected.
1 x XY-W50L HIFI 50W*2 Amplifier Board with WIFI Timing Clock
Note: XY-W50L does not include CR927 battery, you need to install CR927 battery before use.