Why buy from us?
Lorem Ipsum is simply dummy text of the printing and typesetting industry.
Ask a Question About This Product
- Stock: In Stock
- Brand: OEM
- Model: DSLG1009
- Location: https://detail.1688.com/offer/624124329235.html
Available Options
Transistor tester LCR-TC1 full-color screen graphic display instrument
A full-color display multifunctional testing instrument
The test bench is divided into a transistor test area and a voltage regulator diode test area, where KAA is the voltage regulator diode test area
1. It can measure three transistors, two transistors, resistance, capacitance, inductance, thyristor, field-effect transistor, voltage regulator, double diode, light-emitting diode, etc
2. Can measure voltage
3. Built in lithium battery for long battery life
Instructions:
Please use an external 5V power supply or a mobile USB power supply for charging
The red indicator light indicates charging, while the green indicator light indicates charging completion
Kind Reminder:The charging input voltage is 6V. Do not use it under voltage, otherwise it will damage the tester and there is a possibility of battery explosion
4. Infrared decoding function
Aim the infrared remote control at the "IR" test hole of the tester and press the remote control button
If the tester decodes successfully, it will display the user code and data code, and show the corresponding infrared waveform.
If decoding fails or cannot be decoded, the user code and data code will not be displayed. At this time, if on the tester interface, the infrared decoding interface cannot be accessed. If on the infrared decoding interface, the last successful decoding information will still be displayed
The dot in the upper right corner is used to indicate whether infrared data from the remote control has been received. Red indicates that infrared data is being received, and blue indicates successful decoding
5. Automatic calibration
Short circuit three test seats, press the multifunction button briefly, and the tester will automatically calibrate.
During the calibration process, disconnect the short circuit according to the prompts and perform other operations.
Attention: Please discharge before conducting capacitance testing!!


