Relay SSR 4 low 250V2A semiconductor module suitable for solid state relay Arduino
Description5V 240V solid state relay 2A, output with resistance type fuse 240V 2A.2, size: 57*55*25 (length * width * height) net weight: 40g3, the input power supply: 5V DC (160MA)4, the input control signal v..
Module parameters:1. Size: 50.5mm (length) * 38.5mm (Width) * 18.5 (high)2. Weight: 31G3.PCB Color: Black4. The board is surrounded by 4 fixed screw holes, the hole diameter is 3.1mm, which is convenient to mount and fix5. Relay uses a high quality Songle relay, single knife double throw.A common en..
Module description:The module adopts genuine high quality relay, the maximum load of the normally open interface: AC 250V/10A, straight 30V/10A;Using patch optocoupler isolation, strong driving capability, stable performance; trigger current 5mA;Fault-tolerant design, even if the control line is bro..
Description:Feature:This module uses a genuine quality relay normally open interfaceSMD optocoupler isolation, strong drive capability and stable performanceThe module can trigger high or low by jumper settingFault-tolerant design, the relay will not operate even if the control line is destroyedPowe..
4 relay output module, relay output contact is large 250A 10A.Enter IN1, IN2, IN3, and IN4 signal lines are valid.VCC, GND Power input, can relay separately power supply relay power input JD-VCc.use:1. Support all single-chip control;2. Industrial field;3. PLC control;4, home intelligence control...
Feature:Using double-sided FR-4PCB boardUsing high-power relay, control the load up to 30AWith each optocoupler isolation, anti-interference abilityBlack 9500 terminals, more convenient for high-current wiringEach circuit has a relay on LED indicationThe modules comply with international safety stan..
1.Description: It is a multifunction delay relay module.LCD display, very clear, easy to use, powerful.It can be widely used at Smart home,Industrial control,Automatic irrigation,Indoor ventilation.Protection equipment. 2.Features: 1>.LCD display;2>.Support high and low le..
6-30V Micro USB Digital LCD Display Time Delay Relay Module Control Timer Switch Trigger Cycle Timing Relays Module XY-LJ02 Product Highlights: 1. Display with LCD two columns, Can display parameters directly;2. Trigger mode: high and low level, switch q..
The relay coil drive voltage is 5V, and the input control level can also be within 5V module description:
1, output drive capability: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A; 2, easy to use, each output line 3 simple structure, reserving six output terminals; 3, an input port directl..