Menu
Your Cart

1 65mm car wheel +1 motor motor +1 motor bracket +1 brass joint shaft suit

1 65mm car wheel +1 motor motor +1 motor bracket +1 brass joint shaft suit
1 65mm car wheel +1 motor motor +1 motor bracket +1 brass joint shaft suit
1 65mm car wheel +1 motor motor +1 motor bracket +1 brass joint shaft suit
1 65mm car wheel +1 motor motor +1 motor bracket +1 brass joint shaft suit
1 65mm car wheel +1 motor motor +1 motor bracket +1 brass joint shaft suit
1 65mm car wheel +1 motor motor +1 motor bracket +1 brass joint shaft suit
1 65mm car wheel +1 motor motor +1 motor bracket +1 brass joint shaft suit
1 65mm car wheel +1 motor motor +1 motor bracket +1 brass joint shaft suit
1 65mm car wheel +1 motor motor +1 motor bracket +1 brass joint shaft suit
1 65mm car wheel +1 motor motor +1 motor bracket +1 brass joint shaft suit
1 65mm car wheel +1 motor motor +1 motor bracket +1 brass joint shaft suit
$18.29
  • Stock: In Stock
  • Model:
This product has a minimum quantity of 3
introduction to the product

 

wheel parameters
  • smart car high quality wheels. (the wheels are available in silver, red and blue
  • DIAMETER 65MM, WIDTH ABOUT 27MM.
  • the outer ring is a rubber tire containing sponge inner bile, nylon wheels, for model robot cars, can be connected to hexagonal couplings for use.
 
motor parameters
  • name: 25mm dc carbon brush motor (with hall sensor disc)
  • output rate: 150±10%rpm
  • Load current: 200mA (Max)
  • Blocking current: 4500mA (max)
  • Blocking torque: 9.5kgNaN
  • load speed: 100±10% rpm
  • Load torque: 3000gNaN
  • Load current: 1200mA (Max)
  • Load noise: 56dB
  • OPERATING VOLTAGE: 9V
  • shaft dimensions: 14.5mm
  • axial clearance: 0.05-0.50mm
  • SCREW SIZE: M3.0
  • Shaft diameter: phi: 4mm, D3.5
  • disc parameters: 2 pulses/circles
 
bracket parameters
  • ROBOT RUDDER SUPPORT L-BRACKET.
  • 2mm hard aluminum sheet material
  • Standard aluminum alloy multi-functional bracket, high strength, light quality, high process accuracy. The following rudders (servo motors) can be installed: HS322, HS422, Fraser 995, 996 and other rudders, supportIng Heitec, Parallax, Futaba, Fraser and other brands (size 40× 20×36mm) standard rudders.
 
coupling parameters
  • name: 4mm coupling lengthened by 30mm
  • material: brass
  • motor hole (inner) diameter: 4mm
  • total length: 30mm
  • size: edge-to-edge 12mm
  • side screw (2) aperture: 3mm
 

the shipping list

  1. 65mm trolley wheels 1
  2. 25mm motor 1
  3. L-BRACKET 1
  4. brass coupling 1

Write a review

Note: HTML is not translated!
Bad Good