0.8 inch electronic clock Machine Module Digital Tube Digital Time Display WiFi Wireless Auto Pair
WiFi with 0.8 inch digital clock module, only time + date display function. 8 levels of brightness can be adjusted, and there is an automatic brightness function (dark in the evening and bright in the day). Every 1 hour automatic network time, as long as the network is continuous, always keep synchronization with Beijing time, measured and Baidu Beijing time is always within 1 second of error (may be the network delay or other reasons).
MicroUSB power port on the right side, which can be used directly by plugging in the USB.
(Note: The module does not come with MicroUSB power lines)
Dimensions: 71.5 x 25.8 x 14mm(L x W x H)
Power supply voltage: Micro USB 5V
Power supply current: average 80mA (0.4W)
Time display format: 24 hours
Key operation instructions:
 Set time, date and automatic brightness function
In the normal display state, hold down the 'Set' button for more than 1 second to enter the time adjustment function. When the hour starts to blink, press "Adjust" to change the value. When the hour is adjusted, press "Set" to enter the adjustment of minute. When the minute blinks, press "Adjust" to change the value. After the adjustment minutes, press the 'Set' key to enter the second adjustment, press the 'Adjust' key to return to zero. After seconds, press 'Set' to enter the date adjustment (month flashing), press 'Adjust' to change the value. After adjusting the month, press the 'Set' key and the day will blink. Press the 'Adjust' key to change the value. Again SET key to enter the year of adjustment, adjusted the year after pressing the button "into the function of automatic brightness Settings, display AL: x, press 'adjustment' change numerical, AL: 0 to shut down, AL: 1 is open, when AL: 1, the number is in the evening after the show to become a category 1 brightness automatically, automatic after 7:00 in the morning into the brightness values of Ld in the SET. Finally, press the 'Adjust' key to exit to the normal use state.
 Set brightness
In the normal display state, short press "adjust" key, adjust the display brightness, 1~8 levels, and will display the current brightness value, Ld:x, one second later automatically return to the normal use state.
 Adjust the display mode
In the normal display state, press the "Set" button, and the electronic clock will switch between the following three display modes:
Mode 1: Always show the time - > Mode 2: always show the date - > Mode 3: automatically show the time and date in turn (3 seconds to automatically switch)